Brick Veneer Flooring Styles Ideas

Brick veneer flooring can spice up and excite any inside or outside wall of a house. This type of flooring is used to reface fireplaces, and can also be laid on a garden concrete slab to give the fantasy of a full brick patio. Installing brick veneer flooring is speedy and trouble-free. Once you have the proper materials for the flooring and you have purchased a high-quality brick veneer, you need to follow few steps to learn how to properly install the flooring.

brick flooring image

For installing the brick veneer flooring start from the corners and edges of your wall. Lay a full brick on the top corner edge for brick veneer flooring, and then a half brick underneath. Pursue the same pattern from the ceiling to the floor for building the brick floors, walls etc.

Now place a bead of construction adhesive on the backside of a brick 1/4 inch from the edges. And place it on the wall or the floor applying solid and hard force for about five seconds. Carry on placing the brick veneer for building brick veneer flooring until the total area is covered. While installing this type of flooring leave a 1/2 inch space between bricks on all four sides. Scoop up the mortar mix with a brick trowel. Press the mortar into the joints between the brick flooring tile by using a sharp trowel. Fill all the gaps between bricks with mortar to build up exceptional brick veneer flooring.

One of the best methods to clean brick veneer flooring is to use a sand blaster. This sort of machine can be used for the cleaning of brick floor tile, stone, metal and wood as well. The sand blasting machine works in a quite simpler manner. It uses dense air to target the grains of sand onto the surface of the flooring. The rated particles remove the mud and grime at once from the flooring. It sand blasts a concrete surface to make the flooring as clean and as good as new one. In order to attain the best consequences on the brick flooring, you have to learn how to make the brick veneer flooring fresh with sand first.

For starting cleaning the brick veneer flooring, you need to be equipped yourself with the correct materials and tools. These tools of cleaning brick veneer flooring include the fine silica sand, blaster, safety glasses, plastic sheeting, and helmet with specific airing and a couple of overalls. You also need to keep the surrounding area protect while cleaning the brick flooring by covering it, so that it would not mount up the sand that will be jumping off the brick veneer floor. Cover up the whole nearby area with the plastic sheeting.

Grasp the sand blaster about 16 inches from your body and spot the plunger to the brick veneer flooring. Then start squeezing the trigger. Make sure you treat every area with sand for as long as needed for cleaning the brick flooring. You can steadily boost the force until the flooring has no filth or stain on it. You require using small sweeping blasts on the areas with obstinate dirt spots on the brick floor tile and the brick floors. This will give a fresh look to your brick veneer flooring and brick flooring.

 

Back to Top

© 2016 brickflooring.net